Beskrivning
Bredbandslambdakit från Innovate. Detta är det såkallade ”Basik” kittet som innehåller allt du egentligen behöver för att logga dina avgasvärden (AFR/Lambda) vid tex mappning eller felsökning. LC-2 är självkalibrerande, exakt och smidig. Analoga utgångar som kan anslutas till eftermarknadssprut.
Specifications
|
Power |
|
| Operating Voltage | 9.8V to 16V DC |
| Input Current, O² heater initial warm-up | 2.0A nominal, 3A max |
| Input Current, O² normal operation | 0.8A nominal, 1.1A max |
|
Environmental |
|
| Operating ambient temperature | 0° to 140° F (−17.78° to 60° C) |
| Storage ambient temperature | −40° to 185° F (−40° to 85° C) |
| Water resistance | Splash resistant, non-submersible |
|
Sensors |
|
| Compatible Types | Bosch™ LSU4.2 & Bosch™ LSU4.9 |
| Bosch™ Heater Control | Digital PID via pump-cell impedance |
| Measurements | |
| Lambda | .5 to 8.0 |
| Air/Fuel Ratio | 7.35 to 117 (gasoline), Fuel Type Programmable |
| Accuracy | |
| For Lambda | Accurate to +/- .007 (.1 AFR) |
|
Response Time |
|
| Free Air to Lambda | < 100 mS ( < 25 mS typical) |
| Inputs | |
| Serial | 1, Innovate MTS Compatible |
| Outputs | |
| Analog | 2, 0-5VDC, 10 bit resolution, programmable |
| Serial | 1, Innovate MTS Compatible |
| Communication | |
| Serial | MTS (Innovate Modular Tuning System) compatible |
Installation and Setup
Installation of the LC-2 is relatively simple. Complete documentation is supplied, and thesupport pages, videos,application notesandtuner resourcescan also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products.
